MSCBSC 移动通信论坛
搜索
登录注册
网络优化工程师招聘专栏 4G/LTE通信工程师最新职位列表 通信实习生/应届生招聘职位

  • 阅读:1819
  • 回复:2
请高手讨论一下NOKIA基站7745的处理方法
appoint123

鎵嬫満鍙风爜宸查獙璇


 发短消息    关注Ta 

积分 8692
帖子 61
威望 259029 个
礼品券 0 个
专家指数 0
注册 2006-7-7
回答问题数 0
回答被采纳数 0
回答采纳率 0%
 
发表于 2008-09-26 10:11:30  只看楼主 
一. 7745告警定义::
CHANNEL FAILURE RATE ABOVE DEFINED THRESHOLD(占用某个信道的失败率高于设定的门限值),这个告警是用来监视话务信道&信令信道的质量状况,检测可能出现故障的信道。
二. 影响该告警的网络一些使用默认参数的值
ZEEN:TCHFR = TCH failure rate(20 %)
SCHFR = SDCCH failure rate(80 %)
PRDCFR = length of supervision period (60 min)
CS = channel seizure threshold value(10)
SMBNT = supervision start time(08-00)
EMBNT = supervision end time(18-00)
与它相关的参数有四个:一是占用话务信道的失败率门限值是20 %;二是:占用信令信道的失败率门限值是80 %;三是:监视测量信道的时间长度为60分钟;四是:信道的门限值是10 。
三. 如何看告警信息
告警信息关键词:0100 00000000000100060290D
告警信息解释
1 indicates if the alarm is on the TCH or on the SDCCH channel
01: TCH
02: SDCCH
2 indicates if the channel failure rate is above the defined
threshold in time slot 0 01表示TS0高于定义的信道失败率门限
00: belove threshold (no alarm)
01: above threshold (alarm)
3 indicates if the channel failure rate is above the defined
threshold in time slot 101表示TS1高于定义的信道失败率门限
00: belove threshold (no alarm)
01: above threshold (alarm)
4 indicates if the channel failure rate is above the defined
threshold in time slot 201表示TS2高于定义的信道失败率门限
00: belove threshold (no alarm)
01: above threshold (alarm)
5 indicates if the channel failure rate is above the defined
threshold in time slot 3 01表示TS3高于定义的信道失败率门限
00: belove threshold (no alarm)
01: above threshold (alarm)
6 indicates if the channel failure rate is above the defined
threshold in time slot 4 01表示TS4高于定义的信道失败率门限
00: belove threshold (no alarm)
01: above threshold (alarm)
7 indicates if the channel failure rate is above the defined
threshold in time slot 5 01表示TS5高于定义的信道失败率门限
00: belove threshold (no alarm)
01: above threshold (alarm)
8 indicates if the channel failure rate is above the defined
threshold in time slot 601表示TS6高于定义的信道失败率门限
00: belove threshold (no alarm)
01: above threshold (alarm)
9 indicates if the channel failure rate is above the defined
threshold in time slot 701表示TS7高于定义的信道失败率门限
00: belove threshold (no alarm)
01: above threshold (alarm)
10time slot with the highest failure rate 失败率最高的时隙
11subchannel identification TCH:02表示子信道为tch
00: TCH/H -subchannel 0
01: TCH/H -subchannel 1
02: TCH/F -subchannel
subchannel identification SDCCH:
00 - 07:SDCCH -subchannel 0 - 7
12proportion of TCH or SDCCH subchannel releases due to failure
in all channel releases on a given channel during the measurement
period指定信道,TCH/SD因失败释放信道占所有trx释放信道的百分比
扫码关注5G通信官方公众号,免费领取以下5G精品资料
  • 1、回复“YD5GAI”免费领取《中国移动:5G网络AI应用典型场景技术解决方案白皮书
  • 2、回复“5G6G”免费领取《5G_6G毫米波测试技术白皮书-2022_03-21
  • 3、回复“YD6G”免费领取《中国移动:6G至简无线接入网白皮书
  • 4、回复“LTBPS”免费领取《《中国联通5G终端白皮书》
  • 5、回复“ZGDX”免费领取《中国电信5G NTN技术白皮书
  • 6、回复“TXSB”免费领取《通信设备安装工程施工工艺图解
  • 7、回复“YDSL”免费领取《中国移动算力并网白皮书
  • 8、回复“5GX3”免费领取《 R16 23501-g60 5G的系统架构1
  • 对本帖内容的看法? 我要点评

     
    eming0211

    鎵嬫満鍙风爜宸查獙璇


     发短消息    关注Ta 

    积分 5303
    帖子 236
    威望 1791696 个
    礼品券 5 个
    专家指数 -12
    注册 2006-9-1
    回答问题数 0
    回答被采纳数 0
    回答采纳率 0%
     
    发表于 2009-06-25 09:19:56 
    技术问题,回答得专家指数,快速升级
    先顶你一下,望有人解决

    对本帖内容的看法? 我要点评

     
    ncjxghg

    鎵嬫満鍙风爜宸查獙璇


     发短消息    关注Ta 

    积分 2293
    帖子 226
    威望 21431 个
    礼品券 8 个
    专家指数 153
    注册 2007-7-2
    回答问题数 0
    回答被采纳数 0
    回答采纳率 0%
     
    发表于 2009-11-09 00:40:08 
    这告警很难清除,设备自身和无线环境有问题都能出现该告警。我这里的7745有一大把。

    对本帖内容的看法? 我要点评

     

    快速回复主题    
    标题
    内容
     上传资料请点左侧【添加附件】

    当前时区 GMT+8, 现在时间是 2026-04-20 03:59:40
    渝ICP备11001752号  Copyright @ 2006-2016 mscbsc.com  本站统一服务邮箱:mscbsc@163.com

    Processed in 0.502262 second(s), 19 queries , Gzip enabled
    TOP
    清除 Cookies - 联系我们 - 移动通信网 - 移动通信论坛 - 通信招聘网 - Archiver