LTE开站流程
一、建立串口连接以及传BP(basic package)包
1.1将串口线接到DUL板的LMT A口,将网线连接到LMT B口
1.2 打开SecureCRT
点击标示的按钮进行配置
网线接到DUL的LMT B口。使用moshell连接到站上之后
设置secmode
secmode -s -> displays status of security settings of RBS
secmode -fu -> makes FTP unsecure
secmode -tu -> sets telnet and FTP as unsecure
secmode -a u -> enables SFTP
2.2 创建一个mo
在本机使用CesarFTP来创建ftp的server,假设server的ip为10.185.4.13,FTP的用户名为ftp,密码为ftp,则创建mo过程为:
cr SwManagement=1,UpgradePackage=CXP102051%16_R26AZ
Attribute 1 of 2, ftpServerIpAddress (string): 10.185.4.13
Attribute 2 of 2, upFilePathOnFtpServer (string): /CXP102051%16_R26AZ/CXP102051%16_R26AZ.xml
Following attributes are optional. Enter attribute value or "d" for default.
Once the MO is created, these attributes cannot be changed (they are restricted).
Attribute 1 of 2, user (string): ftp
Attribute 2 of 2, password (string): ftp
2.3 升级过程
get UpgradePackage=R5xx
acl UpgradePackage=R5xx
acc UpgradePackage=R5xx forcedInstall
polu(新开一个窗口) # To poll and see the UP installation progress
2.4 运行升级命令
acl UpgradePackage=R5xx
acc UpgradePackage=R5xx rebootNodeUpgrade
polu(新开一个窗口) # To poll and see when the Upgrade is finished. This command is also confirming the Upgrade(AwaitingForConfirm message)
下载可查看源图片
爱立信基站LTE-开站流程.docx